feat: add display of counter value

lib/GazDisplay/GazDisplay.cpp

@@ -0,0 +1,57 @@
+#include "GazDisplay.h"
+
+Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RST);
+
+DisplayError displayInit()
+{
+    if (OLED_RST >= 0)
+    {
+        pinMode(OLED_RST, OUTPUT);
+        digitalWrite(OLED_RST, LOW);
+        delay(20);
+        digitalWrite(OLED_RST, HIGH);
+    }
+    Wire.begin(OLED_SDA, OLED_SCL);
+
+    if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C))
+    {
+        Serial.println("[OLED] Ecran non détecté !");
+        return DisplayError::INIT_FAILED;
+    }
+    display.clearDisplay();
+    display.display();
+    
+    return DisplayError::OK;
+}
+
+void displayGasIndex(uint32_t pulses)
+{
+    float indexM3 = pulses * 0.010f;
+
+    display.clearDisplay();
+
+    // Titre
+    display.setTextSize(1);
+    display.setTextColor(SSD1306_WHITE);
+    display.setCursor(0, 0);
+    display.println("Index gaz");
+
+    // Ligne
+    display.drawLine(0, 10, 128, 10, SSD1306_WHITE);
+
+    // Valeur en grand
+    display.setTextSize(2);
+    display.setCursor(0, 18);
+    display.printf("%.3f", indexM3);
+
+    // Unité
+    display.setTextSize(1);
+    display.setCursor(112, 25);
+    display.println("m3");
+
+    // Impulsions en petit
+    display.setCursor(0, 54);
+    display.printf("Impulsions : %lu", pulses);
+
+    display.display();
+}

lib/GazDisplay/GazDisplay.h

@@ -0,0 +1,21 @@
+#pragma once
+
+#include <Wire.h>
+#include <Adafruit_GFX.h>
+#include <Adafruit_SSD1306.h>
+
+#define OLED_SDA 21
+#define OLED_SCL 22
+#define OLED_RST -1
+
+#define SCREEN_WIDTH 128
+#define SCREEN_HEIGHT 64
+
+enum class DisplayError : int16_t {
+    OK           =  0,
+    INIT_FAILED  = -1
+};
+
+void displayInit();
+void displayGasIndex(uint32_t pulses);
+

platformio.ini

@@ -19,4 +19,7 @@ build_flags =
     -DT3_V1_6_SX1276
 
 lib_deps =
+    adafruit/Adafruit SSD1306 @ ^2.5.15
+    adafruit/Adafruit GFX Library @ ^1.12.1
+    adafruit/Adafruit BusIO @ ^1.16.3
     jgromes/RadioLib@6.6.0

src/config.h

@@ -1,6 +1,7 @@
 #pragma once
 
-#define MAX_RESTART 3
+#define MAX_RESTART 1
+#define MAX_FATAL_RESTART 3
 
 uint64_t joinEUI = 0x35f48318e1324e2e;
 uint64_t devEUI = 0x0586fe41112d83d9;

src/main.cpp

@@ -1,8 +1,10 @@
 #include <Arduino.h>
 #include <LoRaTransmitter.h>
 #include <SimuGaz.h>
+#include <GazDisplay.h>
 #include "config.h"
 
+RTC_DATA_ATTR uint8_t fatalRestartCount = 0;
 RTC_DATA_ATTR uint8_t restartCount = 0;
 
 ITransmitter* transmitter = new LoRaTransmitter(
@@ -17,21 +19,34 @@ void fatalError(const char* msg){
     Serial.flush();
     delay(100);
 
-    if (restartCount < MAX_RESTART) {
-        restartCount++;
-        Serial.printf("[FATAL] Redémarrage %d/3\n", restartCount);
+    if (fatalRestartCount < MAX_FATAL_RESTART) {
+        fatalRestartCount++;
+        Serial.printf("[FATAL] Redémarrage %d/3\n", fatalRestartCount);
         Serial.flush();
         ESP.restart();
     }
 
-    Serial.printf("[FATAL] %d redémarrages : l'appareil entre en sommeil profond permanent\n", MAX_RESTART);
+    Serial.printf("[FATAL] %d redémarrages : l'appareil entre en sommeil profond permanent\n", MAX_FATAL_RESTART);
     Serial.flush();
     esp_deep_sleep_start();
 }
 
-void generateDailyGasPayload(uint8_t *payload){
-    uint32_t pulses = simulateGasPulses(86400);
+void nonCriticalError(const char* msg){
+    Serial.printf("[Error] %s\n", msg);
+    Serial.flush();
+    delay(100);
 
+    if (restartCount < MAX_RESTART) {
+        restartCount++;
+        Serial.printf("[Error] Tentative de redémarrage\n", restartCount);
+        Serial.flush();
+        ESP.restart();
+    }
+
+    Serial.printf("[Error] %d redémarrage : l'appareil continue en mode dégradé\n", MAX_RESTART);
+}
+
+void generateDailyGasPayload(uint32_t pulses, uint8_t *payload){
     payload[0] = (pulses >> 24) & 0xFF;
     payload[1] = (pulses >> 16) & 0xFF;
     payload[2] = (pulses >>  8) & 0xFF;
@@ -42,6 +57,10 @@ void setup() {
     Serial.begin(115200);
     delay(2000);
 
+    if (displayInit() != DisplayError::OK){
+        nonCriticalError("Initialisation du périphérique d'affichage échouée");
+    }
+    
     if (transmitter->init() != TransmitError::OK){
         fatalError("Initialisation du périphérique radio échouée");
     }
@@ -53,9 +72,15 @@ void setup() {
 
 void loop() {
     uint8_t payload[4];
-    generateDailyGasPayload(payload);
+    uint32_t pulses = simulateGasPulses(86400);
+
+    displayGasIndex(pulses);
+    
+    generateDailyGasPayload(pulses, payload);
     transmitter->send(payload, sizeof(payload));
     
     Serial.flush();
+
+    delay(2000);
     esp_deep_sleep(60000000);
 }